Notifications
Clear all
Search result for: WA 0859 3970 0884 [[Hatiga]] Order Pembuatan Neon Box Toko Sembako Murah Bringin Kab Semarang
Page 3 / 3
Prev
... but may be difficult; a microcontroller + driver is great for learning but not the easiest.
To find the pinout, measure resistance with a multimeter: with 3 wires, all pairwise readings should match (the three phases); with 4 wires, the pin that reads the same to all others is the neutral; phase Order only affects direction, so swap any two leads to reverse.
To avoid damage, never apply DC across two leads, don’t stall the rotor, keep leads short (with a decoupling capacitor near the driver), and WAtch temperature.
I'm trying to cascade multiple 74HC595 shift registers to expand the number of digital outputs in my project. While one shift register works perfectly on its own, as soon as I add the second (and especially the third), I start getting strange or inconsistent output—some LEDs don’t light up correctly, or they shift out of Order.
Is there a timing issue I might be overlooking?
Do I need to delay between latching and shifting?
Could signal integrity or voltage drop be the issue when chaining several ICs?
Page 3 / 3
Prev