Best Cheap as Possi...
 
Notifications
Clear all

Best Cheap as Possible ESP32 Boards?

2 Posts
3 Users
0 Reactions
6,621 Views
0
Topic starter

I’m looking to get started with ESP32 development and want to find the most affordable board that still works reliably. There are so many variants out there—ESP32-WROOM, ESP32-C3, ESP32-S3, and countless clones.

What are the cheapest ESP32 boards you've used that still perform well for basic projects like Wi-Fi control, sensor data logging, or IoT experiments? Are the ultra-cheap boards from sites like AliExpress or Amazon worth it, or do they come with issues like instability or poor build quality?


2 Answers
0

I've tested several ESP32 boards, both branded and ultra-cheap clones, for basic IoT projects like Wi-Fi control, sensor data logging, and general experimentation.

In terms of price-to-performance, the ESP32 DevKit V1 (based on the ESP32-WROOM-32 module) remains one of the most reliable and affordable options. You can usually find it for around $4–5 on AliExpress or Amazon. It offers stable Wi-Fi, full GPIO access, and solid support in both the Arduino and ESP-IDF environments. However, some clones use low-quality voltage regulators (like the AMS1117), which can heat up or cause brownouts during Wi-Fi transmission.

Another good option is the ESP32-C3 dev board, which usually costs around $3–4. It uses a RISC-V core and supports native USB, which eliminates the need for a separate USB-to-Serial chip. It's also more power-efficient, making it a great choice for battery-powered applications. The only downside is that it has fewer GPIO pins and lacks dual-core performance.

If you're willing to spend a little more, the ESP32-S3 boards (typically priced at $5–7) are also worth considering. They offer advanced features like USB-OTG and AI acceleration but may be overkill for basic use cases.

As for ultra-cheap boards from platforms like AliExpress or Amazon, they do work—but with some caveats. While they’re perfectly usable for most beginner and intermediate projects, you may encounter issues such as weak voltage regulators, noisy ADC readings due to poor PCB layout, and lack of auto-reset for uploading code.

Some of these boards also come with obscure USB-to-Serial chips, so it's better to stick with ones using CH340 or CP2102. When buying ultra-budget boards, look for those that use genuine Espressif modules (usually marked “ESP32-WROOM” on the metal shield), and always check seller ratings or community feedback.

I hope this information will help you choose the right one!


This post was modified 7 months ago by Harper
0

If you check AliExpress, you'll find that the cheapest ones typically cost around $2—rarely any less. If you come across something significantly cheaper with little to no sales history, it's probably best to avoid it.


Share: